I currently have over 70 lekku orders, so please expect new orders to take at least 4 to 5 months to complete. Thank you for your patience!
I currently have over 70 lekku orders, so please expect new orders to take at least 4 to 5 months to complete. Thank you for your patience!
Cart 0
Oola Silicone Lekku
Oola Silicone Lekku

Oola Silicone Lekku

Regular price $175.00 $0.00

This sale is for a made-to-order Oola style SILICONE lekku headpiece.

Ear Cones:

Oola's ear cones are covered by large white cones that are integrated into her head wraps.  Since each headpiece comes with one free pair of ear cones, please let me know if you want a pair of white cones, or if you would like a pair of matching green ear cones. (NOTE: If you ask for matching green ear cones, and then order a separate pair of Oola style ear cones.... you'll be able to wear the lekku with other costumes in addition to using them for Oola!)


It is difficult to match Oola's color because the references vary considerably from one source to the next. In some images she looks more green, in others she has a more yellow tone.

Reel Creations Oola Mix:

(For USA shipping only) My Oola mix is 1 part Lite Toner and two parts Avocado Toner. It is the best match I've been able to approximate for Oola's color. I don't think it's perfect, but I haven't been able to get a better match so far. Reel Creations is the most popular paint used for Oola costumes because it works well for full-body paint applications. It is the makeup that was used to paint Ray Park for his Darth Maul scenes, and it held up during those fight scenes in the desert so you know it's good stuff! It is an alcohol based ink, so it is very durable and lasts a long time. Apply with an airbrush for best results, and you will need a makeup remover to take it off. Soap and water won't work! I do sell Reel Creations ink, and can combine shipping with the headpiece. SHIPPING NOTE: Because of postal regulations, alcohol based paint can only be shipped via GROUND. I cannot ship it International or via Priority Express.

ProAiir Hybrid Olive Green:

This is the second most popular paint for Oola costumes. It is a hybrid so it has a lower alcohol content, but it still has much of the durability of alcohol based paints. While it can be removed with soap and water, using a makeup remover makes the cleanup process much faster and easier! While the color is a bit too green for Oola, it is fairly close and it's a good quality paint for full-body painting.

Kryolan 534:

Kryolan 534 is the most popular water based paint for Oola costumers. I do NOT recommend this paint if you are going to paint your full body. Water based paints are okay if you're going to wear a body suit and will only paint your face... but if you are going to paint your body, then I highly recommend using an alcohol or hybrid paint. Water based paint will rub off on your clothes, and it will sweat off badly in those bare armpits!

Custom Color:

If you would like me to match a paint brand/color that I didn't list, or a custom color that you have mixed yourself, I can custom color the silicone to match it for you. Just select Custom Color in the drop down menu, and then when you get to the checkout page you can select "Add a note to this order" and tell me what paint brand/color you would like me to match.


Head Sizing Options:

The Oola style headpieces are made in only one size. The mold is 21 inches in diameter and will stretch to accommodate larger head sizes. 


Shipping Time:
Every lekku headpiece is made to order, and will be cast, stuffed, and shipped as quickly as possible.  The final shipping time will depend on how many orders I have in my work queue, and how complicated the designs are. Please be patient, and know that I'm always casting and shipping as fast as I can!

My Order Spreadsheet:

I have a Google spreadsheet where I keep a list of my current orders. It only shows each person's name and what style of headpiece they ordered, but it lets everyone know how many orders I have at any given time and they can watch their names move up to the top of the list as I ship out headpieces. I also post occasional notes and updates at the top of the spreadsheet. If you would like to see the spreadsheet, you can find it here: 


Length and Flexibility:

These lekku are 36 inches in length when cast. They stretch a bit when they're stuffed, and may get a little bit longer when worn since the silicone can stretch a bit under its own weight. These silicone lekku are much more flexible than latex lekku and will sway more as you move. 


Unlike latex lekku, which can begin to crack after a while, silicone lasts quite a long time. My oldest silicone headpiece is nine years old, and it is still in perfect shape even after traveling back and forth across the country for quite a few conventions. Silicone is prone to tearing under some conditions, however. It won't tear without a starting point, so you must be careful not to create a weakened point where a rip might get started. This is primarily a concern around the edges of the head opening. When trimming away excess silicone, make sure to cut a straight line with your scissors. If you leave a jagged edge, that point can begin to tear. Cut a smooth, even line and it won't be a problem! Stuffing: The lekku are filled with pillow stuffing. I reinforce the top curves of the lekku with a layer of firmer silicone and then they are filled with a soft expanding foam which preserves the shape of the curve. Please note that because of the wonderful stretch of silicone, sometimes it is really difficult to remove every trace of 'sagging' in that area where the lekku curve out from the head. Even after years of making silicone lekku I've never been able to fully eliminate that issue!


These lekku average between 1.8 and 2.3 pounds. The weight varies because I can't always use the exact same amount of silicone, stuffing, and expanding foam. I try to keep everything within the same range, however, based on the results I've found to work the best. The silicone itself averages one pound, and the rest of the weight comes from the stuffing.


Silicone is more prone to building up a static charge than anything else I've ever worked with. It's not a huge problem for costumers, just keep in mind that pillow stuffing fibers, loose bristles from paint brushes, and bits of hair will inevitably be found stuck to your headpiece. For the extra wiggle of silicone, though.... it's worth it. You can rub baby powder on the lekku to reduce the static and shine of the silicone.


Nothing sticks to silicone! If you want to attach a decoration permanently to the lekku, typical glues like rubber cement won't work. Instead, you must use a silicone specific adhesive. I recommend Sil-Poxy, which is sold by Smooth-On. If the foam stuffing starts to come out of the lekku after a while, you can also use the Sil-Poxy to glue it back into place, and if the headpiece ever develops a tear, Sil-Poxy can be used to apply a patch.

International Orders:

If you're an international customer, please review your country's import policy before purchasing. Customs fees and import taxes are the sole responsibility of the buyer. As a business owner I cannot declare on the customs paperwork that the lekku are a gift, or that they have a very low value.


The photos shown in this sale are not the same lekku headpiece which is for sale. They are examples. The lekku I ship will be cast from the same mold, and will look identical save for any natural variations in the silicone, colorant, and stuffing. Please keep in mind that colors appear different on different monitors.

I would be happy to help with any Twi'lek costuming questions, so please feel free to ask. Twi'lek costumes are a lot of work, especially since you have to do the body paint every time you wear them if you want to be an exotic color... but it's definitely worth the effort. It's really fun! People often stop you for a picture, and I have a good laugh every time somebody asks, "Can I touch your tentacles?" Good times!

Share this Product

More from this collection